The 17th International Zurich Symposium
and Technical Exhibition on Electromagnetic Compatibility
Proceedings for EMC Zurich '06
Technical Sessions:
AUTO-1 |
Automotive EMC |
|
LIGHT-1 |
Lightning EMC |
AUTO-2 |
SS - Automotive EMC |
|
LIGHT-2 |
Lightning |
CEM-1 |
Computational Electromagnetics
(Invited) |
|
MEAS-1 |
EMC Measurement Techniques |
CEM-2 |
Materials, Absorbers and Shields |
|
MEAS-2 |
EMC Measurement Techniques |
CEM-3 |
Radiation and Scattering |
|
MEAS-3 |
EMC Testing Facility |
CEM-4 |
Time-Domain Modeling |
|
MEAS-4 |
EMC Measurement Techniques |
CEM-5 |
EM Modeling of Complex Problems |
|
MGT-1 |
EMC Management and Standards |
CEM-6 |
Frequency-Domain Modeling |
|
MIL-1 |
EMC in Military |
CEM-7 |
Field-Circuit Iterations |
|
MMA-1 |
Magnetic Material Applications |
COM-1 |
SS - Wireless Communication EMC |
|
PCB-1 |
EMC at PCB Level - Practical Cases |
COM-2 |
EMC in Communication |
|
PCB-2 |
EMC at PCB Level - Design Issues |
COM-3 |
RFID |
|
PCB-3 |
EMC at PCB Level - Modeling Issues |
EASIA-1 |
Special Topic - EMC in Asia |
|
PCB-4 |
Circuit Simulation |
EMI-1 |
Conducted EMI |
|
POW-1 |
Power System EMC |
ICEM-1 |
SS - IC EMC Modeling (Invited) |
|
POW-2 |
Power System EMC |
ICEM-2 |
IC Packaging EM Modeling |
|
PROT-1 |
EMC Protection |
IEMI-1 |
Special Session - Intentional EMI |
|
PROT-2 |
Shielding EMC |
IEMI-2 |
Intentional EMI |
|
SI-1 |
Signal Integrity |
IF-1 |
EMC Industry Forum |
|
Open Forum-1: Poster Session |
|
IMMU-1 |
Immunity Testing |
|
Open Forum-2: Poster Session |
Topical Meeting on Biomedical Electromagnetics:
BIO-1: MRI (Invited)
BIO-2: High Frequency (Invited)
BIO-3: Biomedical EMI
BIO-4: Biomedical
AUTO-1: Automotive EMC
Chairs: Prof. Robert Weigel, Guenter Seibert
W3-AUTO-1-1 |
Design Methodology
to Limit Electromagnetic Coupling Between Board Tracks on PCB Level in
Realtime Alexander
Stadler1, Manfred Albach1, Hans Roßmanith1 and Mr Göran Schubert2 |
W3-AUTO-1-2 |
Inductive and
Capacitive Couplings in DC Motors with Built-In Damping Chokes |
W3-AUTO-1-3 |
Analysis of
Cable Parameters on the
Real Chassis by
Measurement |
W3-AUTO-1-4 |
Simulation and
Analysis of Electromagnetic Environment for the Mobile Receiver |
AUTO-2: SS-Automotive EMC
Chairs:
Prof. Robert Weigel, Andreas Gstoettner
T3-AUTO-2-1 |
Hybrid
Solver Strategies in Automotive EMC Simulation |
T3-AUTO-2-2 |
The Influence
of Ground and Floating Planes on the Electromagnetic Coupling between Board Tracks |
T3-AUTO-2-3 |
Odd-Mode Impedance-Controlled
Shielded Flat Flexible Cables for In-Vehicle Data Transmission |
T3-AUTO-2-4 |
EMC Analysis of
Planar PCB-Based Coils in the Vicinity of the Automobile Carriage |
T3-AUTO-2-5 |
Behavioral Modelling
of ICs for Investigations of Conducted Emissions in Automotive Systems |
CEM-1:
Computational Electromagnetics (Invited)
W1-CEM-1-1 |
Developments of
Finite-Volume Techniques for Electromagnetic Modeling in Unstructured Meshes |
W1-CEM-1-2
|
EMC Computer
Modeling of Distributed Wireless Systems to Assure Efficient Utilization of
the RF Transmission Hyperspace |
W1-CEM-1-3 |
FIT for EMC |
W1-CEM-1-4 |
Model Order
Reduction for Subgriddding in FDTD Scheme |
W1-CEM-1-5 |
A State-Space
Formulation for Field-Averaging for Finite Volume Models |
CEM-2: Materials, Absorbers and Shields
Chairs: Prof. Zhongxian Shen, Dr. Andrew Drozd
W1-CEM-2-1 |
Analysis of
Electromagnetic Field Using CIP Method and Its Application of One-Layer Wave
Absorber |
W1-CEM-2-2 |
Fast and
Accurate Evaluation of the Shielding Effectiveness of Complex Enclosures |
W1-CEM-2-3 |
Modeling
Shielding Properties of Concrete |
W1-CEM-2-4 |
Shielding
Effectiveness of Cylindrical Enclosures with Annular Ring Apertures |
W1-CEM-2-5 |
Novel
Architecture for Waveguide Based Metamaterials |
CEM-3: Radiation and Scattering
Chairs: Prof. Le-Wei Li, Prof. Degui Chen
W1-CEM-3-1 |
A Symmetric
Domain Decomposition Formulation of Hybrid FEM-BEM
Coupling for Electromagnetic Analysis
|
W1-CEM-3-2 |
A New Approach for Analysis of Transient
Scattering from Arbitrarily Shaped 3D Dielectric Bodies |
W1-CEM-3-3 |
Modeling and
Simulation of Branched Wiring Network |
W1-CEM-3-4 |
Numerical
Analysis of Scattering from a General Bi-Isotropic Cylindrical Shell with an
Interior Metal Coating |
W1-CEM-3-5 |
Hybrid
of Periodic Dyadic Green’s Function and FEM for Quiet Zone Analysis in
Anechoic Chamber |
CEM-4: Time-Domain Modeling
Chairs:
Prof. W.J.R. Hoefer, Dr. Zhejie Liu
T1-CEM-4-1 |
Improvement of
Field Distribution in a Reverberation Chamber by Phase Shift of Exciting
Wires, Calculated by TLM |
T1-CEM-4-2 |
Hanging Variables
in Finite Element Time Domain Method with Hexahedral Edge Elements |
T1-CEM-4-3 |
Extraction of
Circuit Parameters for Transmission Lines by Compact 2D FDFD Method |
T1-CEM-4-4 |
A Kind of
Mathematical Model of Numerical Calculation of Substation Grounding Grids in
Time-Varying Fields |
T1-CEM-4-5 |
Subcell FDTD
Modeling of Electrically Thin Dispersive Layers Using Z Transforms |
CEM-5: EM Modeling of Complex Problems
Chairs:
Dr. Poman So, Prof. Tat-Soon Yeo
T1-CEM-5-1 |
An Accelerated
Non-Conforming DP-FETI Domain Decomposition Method for the Analysis of Large
EMC Problems |
T1-CEM-5-2 |
Computational Study
of Significant Semi-Infinite Integrals in Electromagnetic and Atomic
Interactions Cheng-Wei Qiu1,2, Le-Wei Li1, Tat-Soon
Yeo1, Said Zouhdi2 |
T1-CEM-5-3 |
Fast Solution
of Foldy-Lax Equations for Two-dimensional Radiation and Scattering Problems |
T1-CEM-5-4 |
On the Use of
the Equal Area Rule for the Wire-Grid Representation of Metallic Surfaces Abraham Rubinstein1, Cyrous
Rostamzadeh2, Marcos Rubinstein3 and Farhad Rachidi1 |
T1-CEM-5-5 |
On the Use of
Wavelet Transform for Efficient Iterative Solution of the Electromagnetic Models in Lightning Studies |
CEM-6: Frequency-Domain Modeling
Chairs:
Prof. Yilong Lu, Prof. W.J.R. Hoefer
T1-CEM-6-1 |
Calculation of
Dynamic Write Field for Perpendicular Recording Head |
T1-CEM-6-2 |
Proper Orthogonal
Decomposition in Reduced Order Model Generation for Microwave Problem |
T1-CEM-6-3 |
Harmonics Study
for Three-Phase Transformer under DC Inrushing |
T1-CEM-6-4 |
Electric and
Magnetic Fields around an Unloaded via Port Structure |
T1-CEM-6-5 |
The Study of
Nonlinear Characteristic Curve for the Core of Transformer with Magnetic Coupling |
CEM-7: Field-Circuit Iterations
Chairs: Prof. Ban-Leong Ooi, Prof. Ruediger Vahldieck
T1-CEM-7-1 |
Electromagnetic
Radiation from a Trace on a Dielectric Substrate |
T1-CEM-7-2 |
Efficient Closed-Form
Green’s Functions for Multilayered Structure and Its Applications on Circuit
Analysis |
T1-CEM-7-3 |
A New Analog
Behavioral Module Linking Field and PSPICE-Circuit Simulations for Transient
Analysis |
T1-CEM-7-4 |
Calculation of
Per-Unit-Length Parameters for Shielded and Unshielded Twisted Pair Cables |
T1-CEM-7-5 |
Optimization of
a Reflectarray Antenna via Hybrid Evolutionary Algorithms |
T1-CEM-7-6 |
Determination of
Distribution Functions and Parameters for the Preisach Hysteresis Model |
COM-1: Special Section - Wireless Communication EMC
Chair:
Prof. Peter Leung
W3-COM-1-1 |
Crosstalk Immunity
Improvement in Digital Systems Using Binary Phase Shift Keying |
W3-COM-1-2 |
SAR Compliance
in Australia – Requirements for Mobile and Portable Transmitting Devices |
W3-COM-1-3 |
RFI Assessment
on Human Safety of RFID System at Hong Kong International Airport |
W3-COM-1-4 |
Co-existence of
GSM1800 and GSM1900: BTS-to-BTS Interference |
W3-COM-1-5 |
To Estimation of Level of Co-Channel Interference in the
Communication Systems |
COM-2: EMC in Communication
Chairs: Prof. Donglin Su, Dr. Jean-Philippe Parmantier
T2-COM-2-1 |
Prediction Design
of the Noise and Gain Specifications of the RF Receiver |
T2-COM-2-2 |
Simultaneous Estimation
of Mutual Coupling Matrix and DOAs for UCA and ULA |
T2-COM-2-3 |
Analysis on
Interference of DS-UWB Signal to Narrowband Systems |
T2-COM-2-4 |
Analyses of
Several Realistic Exposure Scenarios near Cellular Base Stations |
T2-COM-2-5 |
Directional UWB
Planar Antenna for Operation in the 5-20 GHz Band |
COM-3: RFID
Chairs:
Prof. Peter Leung, Dr. James Cai
F2-COM-3-1 |
Effect of
Internal Patch Antenna Ground Plane on SAR |
F2-COM-3-2 |
Analyze of
Dielectric Coated Personal Communication Systems (PCS) Antenna and Study of
its Field Interaction with the User |
F2-COM-3-3 |
Operational Considerations
in Simulation and Deployment
of RFID Systems |
F2-COM-3-4 |
Analysis of the
Electromagnetic Behavior of a Thin Finite Slot Aperture through Wiener-Hopf Technique |
EASIA-1: Special Topic - EMC in Asia
Chairs: Dr. Leslie Bai, Dr. Erping Li
F2-EASIA-1-1 |
China Approvals
- Break through the Unwritten Law |
F2-EASIA-1-2 |
EMC Technology
Development of Modern China Telecommunication
Field |
F2-EASIA-1-3 |
Progress of
VCCI's Industry Self-Regulations in Japan and a Look to the Future (Asia) |
F2-EASIA-1-4 |
EMC Regulations
and Test Activities in Singapore |
F2-EASIA-1-5 |
New Regulatory
Requirements in Taiwan for Information Technology Equipment (ITE) |
EMI-1: Conducted EMI
Chairs:
Dr. Daming Zhang, Prof. Gao YouGang
F2-EMI-1-1 |
Measurements of
Conducted Voltage in the Low-Frequency Range from 2 kHz to 30 MHz for High-Current
Industrial Applications with Regeneration Drives |
F2-EMI-1-2 |
Study on
Board-Level Noise Filters to Prevent Transient-Induced Latchup in CMOS
Integrated Circuits during EMC/ESD Test |
F2-EMI-1-3 |
Characterization
of RF Noise Source Impedance for Switched Mode Power Supply |
F2-EMI-1-4 |
A New
Integrated Inductor with Balanced Switching Technique for Common Mode EMI
Reduction in High Step-up DC/DC Converter |
F2-EMI-1-5 |
Prediction of
the DM Conducted EMI in PWM Rectifier System |
F2-EMI-1-6 |
Numerical Analysis
of Electromagnetic Emission from Lightning Implement |
ICEM-1: SS - IC EMC Modeling (Invited)
Chair: Prof. Osami Wada
T3-ICEM-1-1 |
Evaluation of
Packages by Simulating IC Emission with LECCS Model |
T3-ICEM-1-2 |
A LECCS Model
Parameter Optimization Algorithm for EMC Designs of IC/LSI Systems |
T3-ICEM-1-3 |
Simulation of
Integrated Circuit Immunity with LECCS Model |
T3-ICEM-1-4 |
Analysis of
Electromagnetic Susceptibility on High Speed Circuits Located in a Shielded
Enclosure |
T3-ICEM-1-5 |
Standardization
of EMC Models of IC/LSI |
ICEM-2: IC Packaging EM Modeling
Chairs: , Prof. Jianguo Ma , Thomas Steinecke
F3-ICEM-2-1 |
Sensitivity of
On-wafer Interconnects to CMOS Process Parameters at Radio Frequency |
F3-ICEM-2-2 |
EMI Modeling
and Simulation in the IC Design Process |
F3-ICEM-2-3 |
Activity Based
High Level Modeling of Dynamic Switching Currents in Digital IC Modules |
F3-ICEM-2-4 |
EMC Analysis on
Stacked Packages |
F3-ICEM-2-5 |
EMI Analysis of
TFT-LCD Driver IC |
IEMI-1: SS- Intentional EMI
Chair: Dr William Radasky
W4-IEMI-1-1 |
The Threat of
Intentional Electromagnetic Interference (IEMI) to Wired and Wireless Systems |
W4-IEMI-1-2 |
Dangerous Pulse
Excitation of Coupled Lines |
W4-IEMI-1-3 |
HPEM and HEMP
Susceptibility Assessments of Computer Equipment |
W4-IEMI-1-4 |
IEMI Against
Modern Civilian Electronic Technologies |
W4-IEMI-1-5 |
Susceptibility of
WLAN and GPS Systems: An Initial Study |
W4-IEMI-1-6 |
Susceptibility of
Sensor Networks to Intentional Electromagnetic Interference |
W4-IEMI-1-7 |
Resistance to
Extended IEMI by Physical/Correlated Wireless Random and Non-random Networks |
IEMI-2: Intentional EMI
Chairs: Prof Wenyan Yin, Dr. William Radasky
T4-IEMI-2-1 |
Generation and
Measurement of a Wide-Band Calculable Electromagnetic Pulse |
T4-IEMI-2-2 |
Radiated Electric
Field Strength from High-Power Microwave Systems |
T4-IEMI-2-3 |
Breakdown Predictions
of Microstrip Interconnects and Coplanar Waveguide-Built Devices in the
Presence of HP-EMPs (Invited) |
IMMU-1: Immunity Testing
Chairs: Keith Armstrong, Chris Zombolas
F1-IMMU-1-1 |
EMI and
Functional Safety Why Traditional Immunity Testing Is Inadequate, and What Should be Done Instead |
F1-IMMU-1-2 |
Effects of DC
Cable Routing in Immunity Testing |
F1-IMMU-1-3 |
Radiated Immunity
Measurement Comparison between OSL and Chamber |
LIGHT-1: Lightning EMC
Chairs: Prof. Vladimir.A. Rakov, Prof. Liew Ah Choy
W4-LIGHT-1-1 |
Transmission Line
Model of Lightning Return Strokes Generalized to Include a Tall Grounded
Strike Object and an Upward Connecting Leader |
W4-LIGHT-1-2 |
Computation of Power
Line Tower Lightning Surge Impedance Using the Electromagnetic Field Method |
W4-LIGHT-1-3 |
A Review of
Studies on Early Streamer Emission and Charge Transfer System Conducted in Malaysia
|
W4-LIGHT-1-4 |
Comparison of
On-line Lightning Monitoring System Data with Derived EM Responses of Space
Launch Systems to Lightning |
W4-LIGHT-1-5 |
A TDOA Based
Approach for Locating Cloud-to-Ground Lightning Strokes, Using Taylor Series
Expansion |
LIGHT-2: Lightning
Chairs: Dr. Farhad Rachidi, Rashide
T4-LIGHT-2-1 |
On the VLF/LF
Radiation Pulse Shapes at the Initial Milliseconds of Lightning Discharges
(Invited) |
T4-LIGHT-2-2 |
Numerical Analysis
of the Charge Distribution on Building Structure in the Preliminary Breakdown
Phase of Lightning |
T4-LIGHT-2-3 |
Ionization Gradient
of Low Resistivity Soils and Liquids |
T4-LIGHT-2-4 |
Real-Time
Detection of Lightning Electromagnetic Field Data: A Wavelet Approach |
MEAS-1: EMC Measurement Techniques
Chairs: Dr. Franz Schlagenhaufer, Chris Zombolas
T2-MEAS-1-1 |
Simultaneous EM
Measurement System Using Parallel Modulated Probe Array (Invited) |
T2-MEAS-1-2 |
Magnetic Near-field
Probe for GHz Band and Spatial Resolution Improvement Technique |
T2-MEAS-1-3 |
Wireless Digital
Data Acquisition System for EMI Measurement in Power Substations |
T2-MEAS-1-4 |
Direct
Diagnostic Testing of Phased Array Antennas Using IR Imaging Techniques |
T2-MEAS-1-5 |
Time Domain
Calibration of Pulsed Current Probe |
MEAS-2: EMC Measurement Techniques
Chairs:
Prof. Flavio Canavero, Dr. Kwok Soohoo
F1-MEAS-2-1 |
Erratic Nature
of Product ESD Immunity Testing Investigated Using a Dual TEM Cell (Invited) |
F1-MEAS-2-2 |
Field Distribution
and Over-Moding in a TEM Cell |
F1-MEAS-2-3 |
Parametric Analysis
of NSA Data by the Methods of Piecewise Multiple Linear Regression |
F1-MEAS-2-4 |
An Efficient
Modeling Method for Analysis of Shielding Rooms |
MEAS-3: EMC Testing Facility
Chair: Garth D'Abreu, Prof. Jinliang He
F1-MEAS-3-1 |
Analysis of
Correction Factor for Site Attenuation |
F1-MEAS-3-2 |
Prediction of
Maximum Electric Field with Given Independent Sampling Points in a Reverberation Chamber |
F1-MEAS-3-3 |
Comparison of
Field Uniformity Characteristics in a Triangular Reverberation Chamber with
QRS Diffusers |
F1-MEAS-3-4 |
Status of
Standards for Alternate Test Sites |
F1-MEAS-3-5 |
Antenna Height
Scan for Minimizing EUT Emission Measurement Uncertainty in Fully Anechoic
Chambers above 1 GHz |
MEAS-4: EMC Measurement Techniques
Chairs: Prof. Qiang Chen, Manfred Stecher
F1-MEAS-4-1 |
A Novel
Realtime Time-Domain EMI Measurement System Based on Field Programmable Gate
Arrays |
F1-MEAS-4-2 |
Shielding Effectiveness
Measurements using a Reverberation
Chamber |
F1-MEAS-4-3 |
Improved Reproducibility
of Conducted Emission Measurements
|
MGT-1: EMC Management and Standards
Chairs: Elya Joffe, Andrei Marinescu
W4-MGT-1-1 |
EMC Progress in
Romania |
W4-MGT-1-2 |
Research for
EMI Basic Standards (Invited) |
W4-MGT-1-3 |
Efficient Identification
of Major Contributions to EMI-induced Rectification Effects in Analog
Automotive Circuits |
W4-MGT-1-4 |
Impedance Bond
Mitigation of Inductive Interference to Railway Wayside Signal Systems |
W4-MGT-1-5 |
EMC Technology
Roadmapping: A Long-Term Strategy |
MIL-1: EMC in Military
Chairs: Dr. Wee-Jin Koh , Dr. Jean-Philippe Parmantier
F3-MIL-1-1 |
Analysis of E3
on Naval Surface Combatants |
F3-MIL-1-2 |
On EMC of ISM
COTS Devices used for Military Experimentation |
F3-MIL-1-3 |
HPM: Effects on
Systems and Protection |
F3-MIL-1-4 |
EMI Effects on
a Generic Missile with IR Position Sensitive Detector |
F3-MIL-1-5 |
Consideration of
the Packaging of HPM Sources on EMC Effects |
F3-MIL-1-6 |
Investigation on
the Connection of a Type A Lightning Strike to a Vertical Cable Conduit Installed Inside a
Warship Integral Mast Structure |
F3-MIL-1-7 |
Military System
EMC Engineering in Singapore |
MMA-1: Magnetic Material Applications
Chairs: Prof. Qingxin Yang, Lee Hill
T4-MMA-1-1 |
Utilizing Overlooked
Characteristics of Ferrites for Improved Printed Circuit Board EMI
Suppression |
T4-MMA-1-2 |
Study on Method
of Modelling and Controlling of Magnetostrictive Material |
T4-MMA-1-3 |
Calculation of
Effective Impedance of Common-mode Choke Made of Mn-Zn Ferrite |
T4-MMA-1-4 |
Improvement on
the Properties of SiC Absorbers |
T4-MMA-1-5 |
Micromagnetic Modeling
Simulations and Applications |
PCB-1: EMC at PCB Level - Practical Cases
Chairs: Prof. Frank Leferink, Prof. Jianguo Ma
W3-PCB-1-1 |
Iterative Methods
for Reluctance Based PEEC Models |
W3-PCB-1-2 |
Improved Impedance
Calculation of Populated PCB Power-Bus Structures |
W3-PCB-1-3 |
Hybridized 3D-FDTD
and Circuit Simulator For Analysis of PCB Via's Signal Integrity |
W3-PCB-1-4 |
Parameterized Macromodels
for Lossy Multiconductor Transmission Lines |
W3-PCB-1-5 |
Comparison of
Methods for Calculating the Loading Effect of Capacitors on Power Ground
Planes |
PCB-2: EMC at PCB Level - Design Issues
Chairs: Prof. Todd Hubing, Prof. Frank Leferink
T3-PCB-2-1 |
PCB Design
Techniques for the SI and EMC of Gb/s Differential Transmission Lines |
T3-PCB-2-2 |
A Simple Method
of Crosstalk Reduction by Metal Filled Via Hole Fence in Bent Transmission
Lines on PCBs |
T3-PCB-2-3 |
EMC Shielding
in Power Electronics Multilayers with Conductive Permeable Material |
T3-PCB-2-4 |
Power Tracks
Instead of Planes to Reduce Radiated Electromagnetic Fields |
T3-PCB-2-5 |
Double and
Single Summation Expression for the Impedance of Populated PCB Power-Bus
Structures Including Asymmetrically Connected Components |
T3-PCB-2-6 |
An Efficient
Approach for the Power/Ground Plane Equivalent Circuit Extraction |
PCB-3: EMC at PCB Level - Modeling Issues
Chairs:
Prof. Joungho Kim, Prof. Kye Yak See
F3-PCB-3-1 |
Finite Difference
Modeling of Multiple Planes in Packages |
F3-PCB-3-2 |
Impact of PCB
Layout Design on Final Product’s EMI Compliance |
F3-PCB-3-3 |
Teaching Near
Field Coupling with PCB Layout |
F3-PCB-3-4 |
Electromagnetic
Compatibility of a Dual-Planar Electromagnetic Band-Gap Microstrip Filter
Structure |
F3-PCB-3-5 |
Low Inductance
Thin Film Capacitors for Decoupling Applications (Invited) |
PCB-4: Circuit Simulation
Chairs:
Prof. Wenyan Yin, Dr. Toshio Sudo
F3-PCB-4-1 |
Behavior of
Switching Noise and Electromagnetic Radiation in Relation to Package Properties
and On-chip Capacitance (Invited) |
F3-PCB-4-2 |
Radiated Emission
Analysis from Printed Circuit Board Edges Using Multiple Stimulus Sources |
F3-PCB-4-3 |
Electrical Analysis
and Design of Differential Pairs Used in High-Speed Flip-Chip BGA Packages |
F3-PCB-4-4 |
EMC Strategy in
Wireless Sensor Packaging |
F3-PCB-4-5 |
Investigation of
Interconnect Effects in a Transimpedance Amplifier |
POW-1: Power System EMC
Chairs: Prof. Xiang Cui, Prof. Michel Ianoz
T4-POW-1-1 |
Analysis of
Ionized Field under ±800kV HVDC Transmission Lines |
T4-POW-1-2 |
Toward a Global
Approach Dedicated to Electromagnetic Compatibility and Energy Efficiency |
T4-POW-1-3 |
Feasibility Study
of Optical Isolator in Reducing CM Conducted Emission from PLC Modem |
T4-POW-1-4 |
A Modeling
Method for Simulation Analysis of Electromagnetic Susceptibility Problem |
T4-POW-1-5 |
Analysis of
Resonance in Transformer Windings under Very Fast Transient Overvoltages |
POW-2: Power System EMC
Chairs: Prof. Michel Ianoz, Prof. Cui Xiang
F4-POW-2-1 |
Full Harmonic
Load Flow Calculation in Power Systems for Sensitivity Investigation |
F4-POW-2-2 |
A Simple Method
for Measuring Complex Transfer Impedance and Admittance of Shielded Cable in
Substations |
F4-POW-2-3 |
The Conducted
Electromagnetic Interference of Small Grid Connected Inverter to Power System
|
F4-POW-2-4 |
On the
Mechanisms of Differential-Mode to Common-Mode Conversion in the Broadband
over Power Line (BPL) Frequency Band |
F4-POW-2-5 |
High-frequency EMTP
Model of Transformer Windings |
PROT-1: EMC Protection
Chair: Dr. William Radasky
F4-PROT-1-1 |
Electrical Strength
of Distribution Insulators under Steep Front, Short Duration Pulse |
F4-PROT-1-2 |
Experimental Investigation
of Shielding Effects due to the Presence of Nearby Parallel Conductors |
F4-PROT-1-3 |
Analytical and
Experimental Study of the Shielding Effectiveness of a Metallic Enclosure
with Off-Centered Apertures |
F4-PROT-1-4 |
A Study of EMI
Suppression Characteristics of Ferrite Cores |
PROT-2: Shielding EMC
Chairs:
Prof. Jinliang He, Dr. Toshihide Tosaka
F4-PROT-2-1 |
Shielding Performance
of a Metallic Rack used for Telecommunication
Equipment: FIT Modeling and Measurements |
F4-PROT-2-2 |
Feasibility Study
for Reconstruction of Information from Near Field Observations of the
Magnetic Field of a Laser Printer |
F4-PROT-2-3 |
Simulation and
Measurement of the Transient Field of Indirect Electrostatic Discharge |
F4-PROT-2-4 |
High Frequency
(HF) Suppression with a Shielded Fence |
F4-PROT-2-5 |
Time-Domain Measurements
of Transient Field Coupling Through Slots |
SI-1: Signal Integrity
Chairs:
Mark Montrose, Dr Albert Lu
T3-SI-1-1 |
Generation of
Common-Mode Currents on PCB Power-Bus Structures |
T3-SI-1-2 |
Study on Delay
Time Characteristics of Shielded Meander Lines |
T3-SI-1-3 |
Characterization
of SSN Coupling to Signal Via in Multi-Layer PCBs and Packages |
T3-SI-1-4 |
Modeling RF
Voltage Drop of Printed Circuit Interconnects Using a Full-Wave Approach |
T3-SI-1-5 |
SPICE Model
Extraction for Signal Integrity
Analysis of Unshielded Twisted Pairs from Full Wave Simulation |
Topical Meeting on Biomedical Electromagnetics
BIO-1: MRI (Invited)
Chairs: Tamer Ibrahim and Tommy Vaughn
W2-BIO-1-1 |
RF Power Deposition in a Human Model with a Pacemaker in
MRI |
W2-BIO-1-2 |
2-D and 3-D Homogeneous/Localized Excite Fields at 3 Tesla
and 7 Tesla Body Imaging |
W2-BIO-1-3 |
Optimization of
B1+ Excitation while Minimizing SAR Hotspots for Phase Amplitude
Controlled High Field MRI Using a Hyperthermia Treatment Planning System and Realistic Patient Anatomies |
W2-BIO-1-4
|
Custom Tailored High Frequency B1–Fields
for Designer Needs: Uniformity Optimization on Large Parameter Space using
Genetic Algorithms and Closed Form Solutions |
W2-BIO-1-5
|
Transceive
Grappa: A Scheme for High Field Imaging with Reduced Field/Tissue RF
Artifacts |
W2-BIO-1-6
|
Tissue Equivalent
Phantoms for High Field Magnetic Resonance Imaging (MRI) |
W2-BIO-1-7 |
Highest Field
Human Imaging |
W2-BIO-1-8
|
SAR and
Temperature: Calculations and Comparison to Regulatory Limits for MRI |
W2-BIO-1-9
|
Modeling of
Pacing Lead Electrode Heating in the MRI RF Field |
W2-BIO-1-10
|
Implementation of
Mode-Scanning Excitation Method with a 16-ch Transmit/Receive Volume Strip
Array at 7T R. Lee1, R. Brown2, G. Mizsei3, R. Xue1, Y.
Wang2, Roney Abraham4, Tamer
Ibrahim4 and C. Stephanescu1 |
BIO-2: High Frequency (Invited)
Chairs: Prof. Michal Okoniewski and Prof. Koichi Ito
W2-BIO-2-1 |
On Various ‘Worst
Case’ Situations for Power Absorption in Homogeneous and Heterogeneous
Phantoms |
W2-BIO-2-2 |
Temperature Rise
in the Human Eye and Orbit due to RF Exposure Calculated with a Realistic
Vascularised Model: Temperature Distributions and the Enormous Impact of
Cooling by Perfusion |
W2-BIO-2-3 |
EMF Estimations
in a Train Carriage: Assessing Implantable Cardiac Pacemaker EMI from
Cellular Radios Yusuke
Abiko1, Takashi Hikage1, Louis Harris1, Masahiko
Hirono1, Toshio Nojima1, Manabu Omiya1, Masaaki
Komazaki2, Soichi
Watanabe3 and Takashi Shinozuka3 |
W2-BIO-2-4 |
Hybrid Analysis
of SAR in Human Body for Base-Station Exposure in Underground Environment |
W2-BIO-2-5 |
Development and
Application of Human Voxel Models in Japan |
W2-BIO-2-6 |
Dosimetric Analysis
for Human Exposure to Body-Mounted Wireless Devices |
W2-BIO-2-7 |
Experimental
Investigation of Breast Cancer Detection using a Fully-populated Array of
Antennas and Real Aperture Synthetically Organised Radar |
W2-BIO-2-8 |
Thin Coaxial
Antennas for Interstitial and Intracavitary Microwave Thermal Therapies |
BIO-3: Biomedical EM
Chairs:
Prof. Jianqing Wang, Prof. Jeong-Ki Pack
T2-BIO-3-1 |
Electromagnetic
Components in Silicon-on-Insulator (SOI) Waveguide for BioSensing Applications
|
T2-BIO-3-2 |
Detection of
Hip Prosthesis Depth Change Using an E-Pulse Technique |
T2-BIO-3-3 |
Implications of
the Revised ICNIRP Electric Field Exposure Guideline on the Design of
Overhead AC Power Lines– 400KV and Above |
T2-BIO-3-4 |
Accuracy Control
of Finite Difference Time Domain (FDTD) Method Using Method of Auxiliary Sources (MAS) and
Investigation of Correlation between SAR and Temperature Rise |
T2-BIO-3-5 |
Review of the
Research and Development in EIT |
BIO-4: Biomedical
Chairs: Dr. Maria Stuchly and Prof. Ian Craddock
T2-BIO-4-1 |
Tissue Sensing
Adaptive Radar for Breast Cancer Detection: Experimental Verification of an
Improved Skin Sensing Method |
T2-BIO-4-2 |
Experimental and
Theoretical Investigation into a Microwave Breast Cancer Detection System |
T2-BIO-4-3 |
Time Domain
Characterization of Dielectric Target in a Half Space Using Complex Natural
Resonance Method |
T2-BIO-4-4 |
Multi-Frequency
Imaging System of EIT with DSP |
T2-BIO-4-5 |
FDTD Analysis
of UWB Pulse Interaction with Biological Tissues |
T2-BIO-4-6 |
The Electromagnetics
of Wireless Brain Machine Interface Operation |
T2-BIO-4-7 |
The Design of a
Fully Integrated Regional Hyperthermia-3T MRI System for the Treatment of
Pelvic Tumours |
T2-BIO-4-8 |
Application of
Electromagnetic Modeling in Biophotonics: Characterizing Sub-Cellular Changes
Using Visible Light |
Open Forum-1: Poster Session
Chairs:
Dr. Zhang Yaojiang, Dr. Sungtek Kahng
W-OF-001 |
Method of
Forces: A Novel Approach for Finding Current Distributions on Single and
Coupled Microstrip Lines |
W-OF-002 |
Effect of Water
Contents and Dissolved Salt in the Sand under High Impulse Currents (P013) |
W-OF-003 |
An Improved
Printed Double-Y Balun |
W-OF-004 |
Reverberation Chambers
- Design and Application for EMC |
W-OF-005 |
Active Diagnostics
of the Failures in Printed-Circuit-Boards |
W-OF-006 |
Air-Gap Effect
Shielding on Multiple Reflection at 900MHz |
W-OF-007 |
Study on the
Effect of Metal Strips Loaded on the Walls of the DC Power-Bus |
W-OF-008 |
Different Excitation
Feed Models for Full-wave Simulation of Aperture Antenna Systems |
W-OF-009 |
Crosstalk Characterizations
of Unshielded Twisted-Pair Cable using the Electromagnetic Topology
Techniques |
W-OF-010 |
EMC Design of
Automation Equipment in Power System |
Open Forum-2: Poster Session
Chairs:
Dr. James Cai, Dr Daming Zhang
T-OF-001 |
Computational Modeling
to Predict Hazards of Electromagnetic Radiation |
T-OF-002 |
A Novel
Multi-Source Model to Predict the Radiated Emissions with a Time-domain EMI
Measurement System |
T-OF-003 |
Artificial Dielectric
Circular Resonator with Novel Anisotropic Permittivity and Its Spurious
Property Control |
T-OF-004 |
A Novel Design
Scheme for Optimizing EMI and Efficiency of Continuous Mode PFC Converters |
T-OF-005 |
An Integrated Approach in EMC
Management for Railway Projects |
T-OF-006 |
Coupling Effect
between Chip Bonding Wire and Signal Trace on PCB |
T-OF-007 |
Simulation of
EMC Problems Caused by Lightning Using Cartesian Analytical Expressions |
T-OF-008 |
Effects of
Direct Lightning on Grounding Grids and EMC Problems |
T-OF-009 |
Computation of
Underground Electromagnetic
Fields Generated by the Lightning Return Stroke |
T-OF-010 |
Novel Route to
Perovskite Lead Titanate from Lead and Titanium Glycolatesvia via Sol-Gel
Process |
T-OF-011 |
Evaluation Method
and Design of Multi-Layered Absorber using an NSGA-II Algorithm |
IF-1: EMC Industry Forum
Chairs:
Elya Joffe, Mark Montrose
F2-IF-1-1 |
Reverberation Chamber
as a Radiation Source |
F2-IF-1-2 |
How to Generate
Easily 3000V/m between 1 and 18 GHz |
F2-IF-1-3 |
A Closer Look
into Radiated Emissions Prescan Measurement Approach |
F2-IF-1-4 |
Managing Risks,
Electrical and EMC on the High Speed Railway Project |
F2-IF-1-5 |
Lightning Induced
Surges on Coaxial Cables and its Protection Technique for Digital
Transmission Interface (DTI) |
EMC Zurich '06: Report | Supplement | Photo Gallery | Exhibition
Last update: 28th October 2008 by APEMC webmaster